设为首页收藏本站
查看: 434|回复: 2

[「硬货·灵感」] 闪铸科技Flashprint 历代版本软件&固件更新日志总览!

[复制链接]
字体大小: 正常 放大
发表于 2016-10-9 18:58:39 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转3D打印

您需要 登录 才可以下载或查看,没有帐号?立即注册

x
APP_INTRO:更新日志

版本-3.13.0
1、支持3mf格式模型的载入和保存
2、添加首选喷头设置功能
3、添加导电PLA、柔性耗材切片配置
4、软件更新时显示更新日志
5、降低默认打印速度,提高打印质量
6、修改一些带线形支撑的模型切片崩溃bug
7、修改使用可溶性材料时模型和线形支撑之间的Z方向空隙未去除bug
8、优化模型修复代码,减少大模型修复时间

版本-3.12.0
1、添加首次使用向导功能
2、添加图片转印章浮雕stl功能
3、打印开始时先移动X/Y轴再上升平台,避免Finder撞坏舵机
4、选择Dreamer/Guider/Finder机型时,切片默认输出的格式改为.gx
5、修改专家模式尺寸补偿功能在使用没有孔洞或者孔洞内还有物体的模型时出错bug
6、修改专家模式一些模型的接缝位置和用户设置不符bug
7、修改专家模式稀疏填充速度设置不起作用bug
8、修改个别模型切片崩溃bug
9、修改个别模型自动支撑生成明显多余的支撑bug
10、修改特定模型预览时没有显示超高,但切片后却超高bug
11、修改喷头温度和平台温度设置上限

版本-3.11.0
1、切片配置对话框添加参数名词解释(鼠标悬停在控件上时显示)
2、添加三角形填充功能,速度接近于线形填充同时具有较高的层与层粘合力
3、添加捷克语语言
4、限制外圈打印速度,改善使用较高速度打印时的打印效果
5、增加线形支撑的默认填充密度,改善支撑面效果
6、修改一些情况下设置的打印暂停高度不起作用bug
7、调整六边形填充密度,修改实际填充量比设置值偏大问题
8、避免一些特殊的薄壁模型被分割为多块打印
9、修改x3g文件预览显示不全bug

版本-3.10.0
1、切片配置窗口添加专家模式,开放更多的高级切片配置参数
2、添加内径、外径尺寸调整功能(专家模式可用)
3、添加外圈起始位置设置功能(专家模式可用)
4、调整Creator Pro默认配置参数,改善打印效果
5、添加意大利语语言
6、调整底板参数,改善一些情况下底板不容易剥离问题
7、默认自动匹配支撑喷头,避免切片时忘记选择支撑喷头而没有生成支撑的情况
8、修改一些复杂模型(浮雕模型)合并填充后可能出现崩溃的bug
9、优化自动支撑生成功能,能够更好的处理一些存在错误的模型
10、修改悬空模型生成底板时崩溃bug

版本-3.9.0
1、添加FlashForge Creator Pro机型支持,可以切片生成x3g文件
2、生成支撑时支持配置支柱直径、基底直径等一些参数
3、默认加粗树状支撑的底部,不打印底板时树状支撑也能够较好的粘到平台上
4、修改使用高分辨率图片生成平面浮雕时生成的stl文件过大问题
5、优化默认的切片配置参数,增加“标准”配置时内部填充的强度
6、修改选择FlashForge Dreamer机型时无法设置关闭风扇问题
7、将复制模型的快捷键从Ctrl+D修改为Ctrl+V,将载入模型的快捷键从Ctrl+L修改为Ctrl+O
8、添加自动摆放新载入的模型功能
9、自动检测显卡支持的OpenGL版本,发现版本过低是弹出提示消息
10、修改在一些64位windows系统上无法正常切片的问题
11、将封顶/封底层数限制修改为最多30层
12、其他功能改进与bug修改

版本-3.8.0
1、添加填充合并打印功能
2、添加达到指定位置后开启风扇功能
3、图片转stl支持生成圆筒、笔筒、灯罩形状的模型
4、修改部分模型生成自动支撑时有些必要的地方没有生成支撑问题
5、修改模型切割占用内存无法及时释放问题

版本-3.7.1
1、提供清空撤销栈功能,方便内存不足时释放不用的内存
2、更新驱动签名,修改Windows XP上驱动安装失败问题
3、Windows XP上安装软件时不再弹出注册模块失败消息
4、优化切片功能,一部分存在错误的模型也能正常切片
6、优化一些提示消息框,软件出错时提供更详细的出错信息
7、修改导入、切割一些特殊的模型后软件崩溃或卡死的问题
8、修改一些内存泄漏问题,减少内存占用
9、修改Microsoft Surface上无法使用触摸屏双击启动模型切割问题

版本-3.7.0
1、添加模型切割功能
2、修改切片后线形支撑的支撑区域变小的bug
3、Windows系统支持stl在文件夹中以缩略图方式显示(Vista或以上版本)
4、预览gcode文件时支撑和模型使用不同的颜色显示
5、修改了左喷头的风扇设置和电流大小误用了右喷头材料进行适配的bug
6、优化模型错误检测代码,减少模型导入时间
7、其他功能改进与bug修改

版本-3.6.0
1、添加打印到一定高度暂停功能
2、修改打印时间估算和实际打印时间差异过大问题
3、解决mac上软件启动后可能出现白屏的问题
4、优化六边形填充路径,将填充路径串联起来
5、解决支撑数量较多时围墙生成速度过慢的问题
6、解决线形支撑数量较多时内存占用过大问题
7、改善一些空走后起始路径缺丝的问题
8、将一些薄壁路径串连起来,减少不必要的接缝
9、修改视角移动到模型内部后无法添加树状支撑的问题
10、修改生成gx文件时模型截图不全的问题
11、其他功能改进与bug修改

版本-3.5.1
1、修复了windows 64位版本切片停留在83%进度的错误


FIRMWARE_INTRO:更新日志v1.1.201606231. 退丝时电机锁住不动2. 进丝时平台下降3. 调平结束平台下降4. 增加累计打印时间功能v1.1.201601251. 优化舵机控制,防止打印过程中舵机抖动2. 修改打印过程中更新固件出现问题bug3. 降低调平Z轴速度,防止调整过程Z轴出现卡顿现象v1.1.201512311. 优化tf卡读写过程,减少tf卡读写错误风险2. 开启看门狗,防止死机3. 调整调平流程v1.1.201511111、优化调平功能2、调整舵机参数范围v1.1.201510281、改进调平功能2、增加舵机参数校准功能3、增加日语和法语4、支持g文件中的暂停命令5、默认预热温度改为220度,限制加热温度最高为240度v1.0.201509161. 提高对U盘和读卡器的兼容性2. 发现打印文件内容错误时进行报错3. 优化喷头校准功能v1.0.20150824第一个版本。

累计签到:63 天
连续签到:7 天

企业名称
兔米周科技

饲养员

Rank: 9Rank: 9Rank: 9

积分
51110

最佳新人活跃会员热心会员推广达人宣传达人灌水之王突出贡献优秀版主荣誉管理论坛元老测评达人

发表于 2016-10-9 19:05:03 | 显示全部楼层



APP_INTRO:Change Logs

The upgrades in FlashPrint-3.13.0
1. Support 3mf format model loading and saving
2. Add setting function of performance extrude
3. Add slice parameter setting of Conductive PLA and Flexible Filament
4. Add update diary when the new version of FlashPrint is available
5. Reduce default print speed to increase printing quality
6. Fixed the bug that some model with line-support fail slice
7. Fixed the bug that there has space in z-direction between model and line-support when using dissolvable filament
8. Optimizated model repair code to decrease the repairing time of big model

The upgrades in FlashPrint-3.12.0
1. Added first time user guide menu
2. Added embossed stamp function
3. Position X/Y axes prior to Z axis to avoid collision of levelling sensor and build plate for Finder.
4. Changed the default output format for the sliced file to .gx to enable file preview function for Dreamer, Guider and Finder.  
5. Added Flashforge official website link and 32bit or 64bit indication under About menu.
6. Bug fix – dimensional adjustments report error when the model contains no cavity or filled cavity under the expert mode.
7. Bug fix – seams don’t match with user setting for some models under the expert mode.
8. Bug fix – Fill sparse density speed setting doesn’t work under the expert mode.
9. Bug fix – Flashprint crash during slicing for certain models.  
10. Bug fix – unnecessarily generated auto supports for certain models under the expert mode.  

The upgrades in FlashPrint-3.11.0
1. Floating boxes with slicing proper nouns’ explanations appear when hovering the cursor over proper nouns.
2. Triangle infill option becomes available.
3. Czech Flashprint 3.11.0 becomes available.
4. Exterior speed obtains a limit value for better printing quality.
5. The default infill density of linear support is increased for better quality of supporting surface.
6. The bug that “pause at height” function doesn’t work sometimes has been removed.
7. The hexagon infill density gets adjusted, modifying the infill amount error.
8. The bug that some thin-walled models get separated after slicing has been removed.
9. The bug that some x.3g files cannot be completely shown has been removed.

The upgrades in FlashPrint-3.10.0
1. New-added “Expert Mode” for more advanced settings in slicing configuration
2. New-added functions of inner diameter and outer diameter adjustment(Available under “Expert Mode”)
3. New-added function of setting the starting point of the out ring. (Available under “Expert Mode”)
4. Adjustment in Creator Pro’s default parameters for better printing quality.
5. New-added Italian version.
6. Adjustment in raft parameters for easier raft remove.
7. New-added function of auto-matching the extruder under support option.
8. The bug that some complicated models may get crashed after combining infills has been eliminated.
9. Optimization in auto-supports generation option.
10. The bug that crashes happen when generating rafts for models with extensive overhangs.

The upgrades in FlashPrint-3.9.0
1. FlashPrint becomes compatible with FlashForge Creator Pro.
2. Allow users to set up post diameter, base diameter and so on in support option.
3. Strengthen support’s bottom part to reduce the risk of collapse.
4. The problem that the generated stl. relievo model with high-resolution picture always overloads is solved.
5. Optimize the default slicing settings.
6. The problem that fans cannot be turned off when selecting FlashForge Dreamer is solved.
7. The Copy shortcut is changed from Ctrl+D to Ctrl+V while the Load shortcut from Ctrl+L to Ctrl+O.
8. Add auto layout function for new-loaded models.
9. Add auto-detect function for graphic card’ s supported OpenGL versions.
10. Some slicing problems occurring in windows 64 are solved.  
11. The maximum layers of the top and bottom is changed to 30.
12. Other updates and modifications.

The upgrades in FlashPrint-3.8.0
1. Add new function of combining infill layers for printing.
2. Add new function of turning on the cooling fan(s) at a pre-set height.  
3. Shapes of tube, canister and lamp become available in the relievo function.
4. The auto-supports function is upgraded for more intelligent supports adding.(As for some models, the auto-supports cannot be comprehensively generated for necessary place.)
5. The problem that the occupied memories of cutting cannot be timely freed is solved.

The upgrades of Flashprint3.7.1
1. The function of cleaning undo stack helps users to free the memory when out of memory.
2. The updated driver signature solves the software installation failure in Windows XP.
3. The registration module failure won’t pop up when installed in Windows XP.
4. The optimized slicer makes some models with errors available for slicing.
5. More detailed information will be included in message prompt box.
6. The software crash problem while loading or separating some special models are resolved.
7. Dealing with the memory leak so as to reduce memory profiler.
8. The cutting button becomes available when touching on Microsoft Surface.

The upgrades in FlashPrint-3.7.0
1. Cutting function is added.
2. Eliminate the bug that the support area decreases after slicing.
3. Models in stl folder display their thumbnails under Windows(Vista and its higher versions)
4. Different colors for supports and model while previewing gcode file.
5. Eliminate the bug that the fan and current settings of left extruder falsely fit with the filament in the right extruder.
6. Optimize the error detecting code to shorten the loading time.
7. Other updates and modifications.

The upgrades in FlashPrint-3.6.0
1. Add new function that pause printing when the model is printing to a certain height
2. Modify the problem of wide variation in real printing time and print time estimation
3. Solved the problem that there appears White screen when use FlashPrint in Mac version.
4. To optimize the hexagonal filling path, and the filling path is connected in series.
5. Solve the problem that too much support will decrease the speed of the wall formation.
6. Solve the problem that too much support occupied memory to large.
7. Modify the problem that no filament in the beginning printing after traveling
8. Link in the path of thin-wall of model to decrease unnessary connection
9. Solve the problem that tree-support cannot be add when view  move into inside view of model
10. Solve the problem that preview of .gx file can not show entirely
11. Other updates and modifications.

The upgrades in FlashPrint-3.5.1
1. The error that slicing stops at 83% in Windows(64) is modified.
科技享受生活,艺术妆点生活!3D打印兔米周科技欢迎您~~

欢迎加入我们!QQ群1:456344941 群2:481977465 群3:468856349

尚未签到

小白兔

Rank: 1

积分
23
QQ
发表于 2018-1-13 22:57:32 | 显示全部楼层
求Flashprint切片软件感谢感谢感谢
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

为兴趣而生,兔米周---更懂你。 登录兔米周 立即注册
快速回复 返回顶部 返回列表